Structural Steel Selection Considerations
A Guide for Students, Educators, Designers, and Builders
Sponsored by the Structural Engineering Institute of ASCE; American Institute of Steel Construction, Inc. This report describes the properties of steel...
Stronger Longer
Like many older concrete bridges, the Sierrita de la Cruz Creek Bridge, a 1957 crossing near Amarillo, Texas, suffered from concrete deterioration. When the Texas Department of Transportation...
Maintenance of Diaphragm-Girder Connections
Fatigue cracking at diaphragm-girder connections and at similar connections of cross-frames and floorbeams have been common in steel highway bridges for the past 20 or 30 years. Fatigue...
Update of Serviceability Design Considerations for Low-Rise Steel Buildings
In 1990, the American Institute of Steel Construction published Servicability Design Considerations for Low-Rise Buildings by James M. Fisher and Michael A. West. This document was published...
Evolution of Composite Floor Systems in the United States
Composite floor systems, which combine structural steel beams with a cast-in-place concrete slab, have grown in popularity in the U.S. during the past 40 years. In most early applications,...
Mile High Design
Denver's hybrid steel and concrete Invesco Field at Mile High, the National Football League's first design/build stadium, is on schedule to replace the existing...
Pushing Back
(Available on in special edition) The design for the $3.5-million Cameron Run tunnel rehabilitation project involved a tricky and relatively unproven method of pushing corrugated steel...
Sharp Curves
In Madison, Mississippi, just north of Jackson on Interstate 55, a diamond interchange with State Route 463 has become a bottleneck for commuters and local motorists. But the typical solution�a...
Competitive Edge
A new design system called the simplified economical bridge design (SEBD) makes steel cost-competitive with concrete for short- and medium-span bridges for the first time. In fact, a comparative...
Composites Enhance Timber Bridges
Two relatively new technologies are available for reinforcing or strengthening timber bridges with fiber-reinforced polymers (FRPs). The first consists in reinforcing the tension side...
Extended Life Span
The Harlem River Lift Span�part of New York City's Triborough Bridge System�was the largest vertical span in the country at the time of its construction in 1936. The lift...
High-Tech Inspection
The Federal Highway Administration's National Bridge Inspection Program requires the states to report the condition of its bridges as determined by visual inspection, and...
Native American Imprint
Following a design phase of more than four years, construction has finally begun on the Smithsonian Institution's National Museum of the American Indian, which will occupy...
Big Screen Debut
The Glenn-Colusa Irrigation District (GCID) encompasses nearly 150,000 acres (60,700 ha) of prime agricultural land in California's Sacramento Valley, generally considered...
Good Vibrations
As advances in material technology and structural efficiency find reflection in structures that are lighter, more slender, and more daring architecturally, design teams must focus more...
Raising the Bar of BART
Although it was originally designed to withstand a strong earthquake, and did so admirably in 1989, the Bay Area Transit (BART) system was recently evaluated to determine its ability to...
Gap Analysis for Durability of Fiber Reinforced Polymer Composite in Civil Infrastructure
Prepared by the Civil Engineering Research Foundation. This report provides the results of a study on what is known and not known about the use of...
Guidelines for Inspection and Monitoring of In-Service Penstocks
This volume provides a guide to information and engineering techniques for inspection and monitoring of in-service penstocks. This guide covers penstocks constructed of steel, concrete,...
The Shape of Things to Come
High-performance steel (HPS) offers improved toughness and durability for bridge construction. This article presents several innovative concepts for HPS structural systems�including I-girders...
Closing in on Approval
A lack of qualification criteria and design standards has hindered some engineers from using fiber-reinforced polymers to restore concrete structures. But several organizations�among them,...
Return to search